Tips To Make Avoiding And Addressing Plumbing Issues Easier

Plumbing problems will occur in many forms, and it is a common issue for homeowners to be ill-equipped to address the more common types of plumbing problems that can arise. Learning about some of the simple steps for avoiding or addressing plumbing problems may help you to avoid these disruptive situations.

Appreciate The Effectiveness Of Hot Water

Clogs and slow drains are routine plumbing problems, and many homeowners may simply assume that chemical clog removers will be a safe and highly effective option for removing the clog so that water can flow normally. However, hot water can be extremely effective at preventing this issue from developing. By flushing the drain and pipes with water that is just below boiling, you can loosen and break up many small clogs and sticky residues that are starting to form. This approach will be most effective when the drains are flush at least once every couple of months. When pouring this hot water down the drain, it is important to make sure that it is not actually boiling as this can indicate that it is hot enough to damage the seals in the plumbing.

Avoid Neglecting Your Aerators

Faucets will often utilize aerators to help reduce the amount of water that is being used as well as increasing the water pressure from the faucet. These aerators are essentially small discs that have holes in them for the water to flow out. Dirt, minerals, and other substances can collect in these small holes, which can lead to blockages. Once blockages form, you may find that the performance of your faucet drops and leaks are more likely to develop near the aerator. Cleaning the aerator by scrubbing it with a toothbrush and soaking it in vinegar will help to remove these materials so that the water can efficiently flow from the faucet.  

Identify The Pipes That Will Be Most Exposed To The Elements

Cold temperatures can be extremely damaging to plumbing as it can lead to water freezing in the pipes. Unfortunately, some homeowners fail to realize that some of their pipes are more exposed to this damage than others. In particular, plumbing pipes that are near exterior walls or crawl spaces can be susceptible to freezing. Touring your home to look for any pipes that are exposed to cold temperatures may not be the most enjoyable way of spending an afternoon, but it will allow you to identify the most at-risk pipes. By applying insulation to these pipes, you will be able to greatly reduce the risk of them freezing and rupturing.

Check out sites like http://www.bishopplumbing.com for more information.

Share